Supports guttering and tile edges and protects rafters.

2. Guttering

Gutters are installed to provide the correct gutter fall to allow rainwater to drain away efficiently. Support brackets are installed a maximum 800mm apart. Manufactured to meet BS EN 150 9002.

3. Bargeboard

Provides a finish to the gable end of your home sealing the verge. Bargeboards and fascias are manufactured from 19mm heavy duty board to provide long life and durability. Finished with a highly polished surface to reflect heat to reduce expansion and contraction problems which may occur with thinner boards. A foamed core makes it lightweight and resistant to water ingress. 5 mtr lengths are used to produce fewer joins.

Protects underneath the rafters.

5. Cladding

Cladding is fixed to rigid treated tanalized timber batten. Cladding can be 150mm wide shiplap or 100mm wide tongue-and-groove, both allow for a 25mm overlap and 8mm interlock between planks. A waterproof membrane is installed etween cladding and battens to provide extra protection from secondary water igress.

6. Downpipes

Available in square or round style, downpipes carry rainwater from guttering to the drains. Downpipes are fixed to brickwork a minimum of 800mm apart.